SUPPLY BOXES 73 PRODUCT NO. DESCRIPTION CTN. QTY. No Hammer Arrestors 37741 MODA Lavatory, Copper (Male), Standard 12 37743 MODA Lavatory, F1807 PEX (Brass), Standard 12 37745 MODA Lavatory, F1960 PEX (Brass), Standard 12 37742 MODA Lavatory, CPVC (Male), Standard 12 37748 MODA Lavatory, Push Connect, Standard 12 37757 MODA Lavatory, Copper (Male), Contractor 12 37759 MODA Lavatory, F1807 PEX (Brass), Contractor 12 37761 MODA Lavatory, F1960 PEX (Brass), Contractor 12 37758 MODA Lavatory, CPVC (Male), Contractor 12 Hammer Arrestors 37749 MODA Lavatory, Copper (Male), Standard 12 37751 MODA Lavatory, F1807 PEX (Brass), Standard 12 37753 MODA Lavatory, F1960 PEX (Brass), Standard 12 37750 MODA Lavatory, CPVC (Male), Standard 12 37756 MODA Lavatory, Push Connect, Standard 12 37765 MODA Lavatory, Copper (Male), Contractor 12 37767 MODA Lavatory, F1807 PEX (Brass), Contractor 12 37769 MODA Lavatory, F1960 PEX (Brass), Contractor 12 37766 MODA Lavatory, CPVC (Male), Contractor 12 All MODA boxes come with faceplates, side brackets and protective sticker. MODA Drain Boxes also come with a tool-free quarter-turn test plug. LAVATORY SUPPLY BOXES – TWO VALVE BOX SPECIFICATIONS Oatey MODA™ Lavatory Supply Boxes shall be used in residential or commercial applications requiring a supply valve recessed in the wall. The MODA™ lavatory assembly contains two 3/8" OD compression valves pre-installed in a PVC box, connected by inter-locking wing flanges that can be easily disassembled and re-assembled. The wing flanges shall allow installation on a single stud, or between two studs using the included side brackets. No additional components shall be required for a between stud installation. Valves shall be a two-piece design, permitting field replacement, and shall be secured with a stainless steel retention clip. Valves are available with or without water hammer arrestors and shall be installed upright or inverted. The assembly shall include an emergency drain port for protection from supply hose leaks. APPROVALS & LISTINGS Valves: ASME A112.18.1 / CSA B125.1 NSF / ANSI 61 & 372 Water Hammer Arrestors: ASSE 1010 Boxes: IAPMO-Listed, PS-54 FEATURES & MATERIALS Outlet Box & Brackets: PVC Valve Body: Forged Brass C46500 No Lead (Chrome Plated) Valve Retention Clip: Stainless Steel Valve O-Rings: NSF/FDA Approved EPDM (2) PERFORMANCE SPECIFICATIONS Temperature Rating (Valve): 250° F / 121° C Max Testing Pressure (Valve): 100 psi (Air) / 250 psi (Water) DIMENSIONS A: Box Width 8.00" B: Box Depth 3.38" C: Box Height 4.85" D: Bracket Width 4.00" E: Bracket Length 8.00" F: Faceplate Width 6.00" G: Faceplate Height 6.45" H: Faceplate Depth 1.25" ACCESSORY COMPONENTS INCLUDE: Side Brackets LocPin™ Stainless Steel Retention Clip Faceplate Insert Faceplate Blue & Red Clips Sticker Cover for Debris Protection
.png?v=1681321043064)
